[VENDU] Module TD11 100e!!!

[nikene]

besoin d'aide

je n'arrive pas à loader les kits.

Que ce soit les kits individuels ou le backup, il me met "could'nt read this file" au moment de loader les données. Connaissez vous le problème

Merci

[xhala_debru]

Salut,

Voici les instructions que j'ai suivies quand j'ai chargé mes kits vexpressions dans mon TD11
Je pense qu'il est essentiel que ta clé usb aie été formatté dirtectement sur ton module
J'ai suivi ces instructions et n'ai pas rencontré de problème.

C'est juste un copié/collé de la doc, mais je pense que c'est une bonne base

Section I: Formatting USB Device in TD-11 See page 40 in your TD-11 manual

Step 1: Insert your USB drive into the module.
Step 2: From the Main Kit screen, Press the MENU Button 3 times.
Step 3: Press System
Step 4: Use Cursor and scroll down to USB Memory and Press Enter
Step 5: Cursor down to Format and press FORMAT
Step 6: At the Confirmation Screen, Press OK
Step 7: At the Confirmation Screen, Press OK

Press Cancel if you do not wish to Format your Flash drive

Section II: Saving Data to an external USB Device in TD-11 See page 38 in your TD-11 manual

Step 1: Insert your formatted USB drive into the module.
Step 2: From the Main Kit screen, Press the MENU Button 3 times.
Step 3: Press System
Step 4: Use Cursor and scroll down to USB Memory and Press Enter
Step 5: Find Save Backup and press Enter
Step 6: In the Save Backup Screen, select a backup number to save as
Step 7: You can name your backup if desired, press Name, use arrows to select letters, etc.
Press Exit when completed.
Step 8: In the Save Backup Screen, Press SAVE
Step 9: Press OK to save backup.

Press Cancel if you do not wish to save a backup to your Flash drive




Section III: Saving Your V Expressions LTD Apex Backup file to your USB Drive for PC

Step 1: Insert your formatted USB drive into your computer. (SEE Section I)
Step 2: From your Desktop, locate the file: BKUP-020.TD0
Step 3: Open your USB drive and locate the Roland Folder and Dbl Click
Step 4: A TD-11 Folder will appear, DBL click that
Step 5: A Backup Folder will appear, DBL Click that
Step 6: Select and drag the BKUP-020.TD0 file into this folder.
Step 7: Verify that the file is there.
Step 8: Once verified the file is there, back out of screen and EJECT the USB Drive

Section III: Saving Your V Expressions LTD Apex Backup file to your USB Drive for Mac

Step 1: Insert your formatted USB drive into your computer. (SEE Section I)
Step 2: From your Desktop, locate the USB Flash drive Icon
Step 3: Open your USB drive and locate the Roland Folder and Dbl Click
Step 4: A TD-11 Folder will appear, DBL click that
Step 5: A Backup Folder will appear, DBL Click that
Step 6: Select and drag the BKUP-020.TD0 file into this folder.
Step 7: Verify that the file is there.
Step 8: Once verified the file is there, EJECT the USB Drive

In rare cases, create the Roland Folder / TD-11 Folder / Backup Folder & Kit Folder manually on your mac.

Section IV: Loading APEX from an external USB Flash Drive for TD-11

Important Note:

All the TD-11’s current user data is overwritten for Kits 1-50 upon a successful load of Apex. Make sure you have made a backup to your USB drive if you have custom kits in these locations. See Section III above on how to save.

You will not lose any factory kits or sounds. The factory reset information will not be disturbed. You can recall any factory kit by using the 1 kit restore feature – see your TD-11 owners manual for instructions.

Before Loading Apex to your TD-11:

The pad assignments and trigger information are set to a standard Default Roland setting. You will need to write down any special pad or custom trigger settings you may have adjusted. The TD-11 doesn't allow you to load kit and pad settings separately. After loading Apex, you will need to recreate all the custom pad settings you have made (pad type, sensitivity, re-trig, etc.)

IMPORTANT NOTE about trigger settings: Loading as Backup:

The pad assignments and trigger information are set to a standard Default Roland setting. You will need to write down any special pad or custom trigger settings you may have adjusted. The TD-11 doesn't allow you to load kit and pad settings separately. After loading Apex, you will need to recreate all the custom pad settings you have made (pad type, sensitivity, re-trig, etc.)






Section IV: Loading Individual Kits See page 25 in your TD-11 manual


Before loading Apex as a backup, you have the option to load each kit in individually.
This preserves your trigger settings, but will take more time.

Make sure you have copied all the individual kit files from your download to the KIT folder on the USB drive.
You can also replace the Kit Folder from the VEX Zip with the Kit folder on the USB drive.

[nikene]

merci xhala

J'ai trouvé comment faire hier soir. j'ai mis à jour mon module et du coup les fichiers sont devenus visible. le module était en 1.0 et la mise à jour en 1.15

Bref, ça il ne l'avait pas mis dans la doc que j'avais et que j'avais suivi à la lettre

[xhala_debru]

Ce qui compte, c'est que ça marche

[jacko1309]

Et alors Nikene, tu en penses quoi des sons Vexpression? Je ne te pose pas la question des sons du td11, tu connais déjà!

[nikene]

Et alors Nikene, tu en penses quoi des sons Vexpression? Je ne te pose pas la question des sons du td11, tu connais déjà!

ah ben j'ai tellement galéré pour les installé (à cause d'une mise à joue de firmware) que j'ai pas eu le temps de les essayé (j'ai un petit bébé et j'ai trouvé la solution dimanche soir). Donc ça fonctionne mais j'ai pas encore tester les 30 kits